Conditional expression of FumA in Aspergillus niger enhances synthesis of L-malic acid.

Currently, the L-malic acid titer achieved through Aspergillus niger fermentation reaches 201 g/L, meeting industrial demands satisfactorily. However, the co-presence of structurally similar fumaric acid and succinic acid in fermentation products suggests a theoretical potential for further improvement in L-malic acid production. In the tricarboxylic acid cycle, fumarate reductase mediates the conversion of succinic acid to fumaric acid. Subsequently, fumarase catalyzes the conversion of fumaric acid to L-malic acid. Notably, both enzymatic reactions are reversible. Our investigation revealed that A. niger contains only one mitochondria-located fumarase FumA. Employing CRISPR-Cas9 technology, we performed a replacement of the fumA promoter with a doxycycline-induced promoter Tet. Under non-inducing condition, the conditional strain exhibited increased levels of fumaric acid and succinic acid. It strongly suggests that FumA mainly promotes the flow of fumaric acid to L-malic acid. Furthermore, a promoter PmfsA that is exclusively activated in a fermentation medium by calcium carbonate was identified through RNA-sequencing screening. Utilizing PmfsA to regulate fumA expression led to a 9.0% increase in L-malic acid titer, an 8.75% increase in yield (glucose to L-malic acid), and an 8.86% enhancement in productivity. This research serves as a significant step toward expediting the industrialization of L-malic acid synthesis via biological fermentation. Additionally, it offers valuable insights for the biosynthesis of other organic acids.IMPORTANCEThis study focuses on enhancing L-malic acid synthesis by modifying the tricarboxylic acid cycle within the mitochondria of Aspergillus niger. We emphasize the significant role of fumarase in converting fumaric acid into L-malic acid, enhancing our understanding of metabolic pathways in A. niger. The precise regulation of fumA is highlighted as a key factor in enhancing L-malic acid production. Furthermore, this research introduces a stringent conditional promoter (PmfsA), exclusively activated by CaCO3. The utilization of PmfsA for fumA expression resulted in heightened L-malic acid titers. The progress in metabolic engineering and bioprocess optimization holds promise for expediting industrial L-malic acid synthesis via biological fermentation. Moreover, it carries implications for the biosynthesis of various other organic acids.

Effective synthesis of high-content fructooligosaccharides in engineered Aspergillus niger.

BACKGROUND: Aspergillus niger ATCC 20611 is an industrially important fructooligosaccharides (FOS) producer since it produces the ß-fructofuranosidase with superior transglycosylation activity, which is responsible for the conversion of sucrose to FOS accompanied by the by-product (glucose) generation. This study aims to consume glucose to enhance the content of FOS by heterologously expressing glucose oxidase and peroxidase in engineered A. niger. RESULTS: Glucose oxidase was successfully expressed and co-localized with ß-fructofuranosidase in mycelia. These mycelia were applied to synthesis of FOS, which possessed an increased purity of 60.63% from 52.07%. Furthermore, peroxidase was expressed in A. niger and reached 7.70 U/g, which could remove the potential inhibitor of glucose oxidase to facilitate the FOS synthesis. Finally, the glucose oxidase-expressing strain and the peroxidase-expressing strain were jointly used to synthesize FOS, which content achieved 71.00%. CONCLUSIONS: This strategy allows for obtaining high-content FOS by the multiple enzymes expressed in the industrial fungus, avoiding additional purification processes used in the production of oligosaccharides. This study not only facilitated the high-purity FOS synthesis, but also demonstrated the potential of A. niger ATCC 20611 as an enzyme-producing cell factory.

Cultivation of recombinant Aspergillus niger strains on dairy whey as a carbohydrate source.

Agricultural waste valorisation provides a sustainable solution to waste management, and combining waste utilisation with commodity production allows for responsible production processes. Recombinant Aspergillus niger D15 strains expressing fungal endoglucanases (Trichoderma reesei eg1 and eg2 and Aspergillus carneus aceg) were evaluated for their ability to utilise lactose as a carbon source to determine whether dairy waste could be used as a feedstock for enzyme production. The recombinant A. niger D15[eg1]PyrG, D15[eg2]PyrG, and D15[aceg]PyrG strains produced maximum endoglucanase activities of 34, 54, and 34 U/mL, respectively, on lactose and 23, 27, and 22 U/mL, respectively, on whey. The A. niger D15[eg2]PyrG strain was used to optimise the whey medium. Maximum endoglucanase activity of 46 U/mL was produced on 10% whey medium containing 0.6% NaNO3. The results obtained indicate that dairy whey can be utilised as a feedstock for recombinant enzyme production. However, variations in enzyme activities were observed and require further investigation.

Characterization of a recombinant Aspergillus niger GZUF36 lipase immobilized by ionic liquid modification strategy.

Enzyme immobilized on magnetic nanomaterials is a promising biocatalyst with efficient recovery under applied magnets. In this study, a recombinant extracellular lipase from Aspergillus niger GZUF36 (PEXANL1) expressed in Pichia pastoris GS115 was immobilized on ionic liquid-modified magnetic nano ferric oxide (Fe3O4@SiO2@ILs) via electrostatic and hydrophobic interaction. The morphology, structure, and properties of Fe3O4@SiO2@ILs and immobilized PEXANL1 were characterized by scanning electron microscopy, Fourier transform infrared spectroscopy, x-ray diffraction, vibration sample magnetometer, and zeta potential analysis. Under optimized conditions, the immobilization efficiency and activity recovery of immobilized PEXANL1 were 52 ± 2% and 122 ± 2%, respectively. The enzymatic properties of immobilized PEXANL1 were also investigated. The results showed that immobilized PEXANL1 achieved the maximum activity at pH 5.0 and 45 °C, and the lipolytic activity of immobilized PEXANL1 was more than twice that of PEXANL1. Compared to PEXANL1, immobilized PEXANL1 exhibited enhanced tolerance to temperature, metal ions, surfactants, and organic solvents. The operation stability experiments revealed that immobilized PEXANL1 maintained 86 ± 3% of its activity after 6 reaction cycles. The enhanced catalytic performance in enzyme immobilization on Fe3O4@SiO2@ILs made nanobiocatalysts a compelling choice for bio-industrial applications. Furthermore, Fe3O4@SiO2@ILs could also benefit various industrial enzymes and their practical uses. KEY POINTS: • Immobilized PEXANL1 was confirmed by SEM, FT-IR, and XRD. • The specific activity of immobilized PEXANL1 was more than twice that of PEXANL1. • Immobilized PEXANL1 had improved properties with good operational stability.

Enhancing l-Malic Acid Production in Aspergillus niger via Natural Activation of sthA Gene Expression.

The efficient production of l-malic acid using Aspergillus niger requires overcoming challenges in synthesis efficiency and excessive byproduct buildup. This study addresses these hurdles, improving the activity of NADH-dependent malate dehydrogenase (Mdh) in the early stages of the fermentation process. By employing a constitutive promoter to express the Escherichia coli sthA responsible for the transfer of reducing equivalents between NAD(H) and NADP(H) in A. niger, the l-malic acid production was significantly elevated. However, this resulted in conidiation defects of A. niger, limiting industrial viability. To mitigate this, we discovered and utilized the PmfsA promoter, enabling the specific expression of sthA during the fermentation stage. This conditional expression strain showed similar phenotypes to its parent strain while exhibiting exceptional performance in a 5 L fermenter. Notably, it achieved a 65.5% increase in productivity, reduced fermentation cycle by 1.5 days, and lowered succinic acid by 76.2%. This work marks a promising advancement in industrial l-malic acid synthesis via biological fermentation, showcasing the potential of synthetic biology in A. niger for broader applications.

Improving glucose oxidase catalysis in Aspergillus niger via Vitreoscilla hemoglobin fusion protein.

Oxygen is crucial for converting glucose to gluconic acid catalyzed by glucose oxidase (Gox). However, industrial gluconic acid production faces oxygen supply limitations. To enhance Gox efficiency, Vitreoscilla hemoglobin (VHb) has been considered as an efficient oxygen transfer carrier. This study identified GoxA, a specific isoform of Gox in the industrial gluconic acid-producing strain of Aspergillus niger. Various forms of VHb expression in A. niger were tested to improve GoxA's catalytic efficiency. Surprisingly, the expression of free VHb, both intracellularly and extracellularly, did not promote gluconic acid production during shake flask fermentation. Then, five fusion proteins were constructed by linking Gox and VHb using various methods. Among these, VHb-GS1-GoxA, where VHb's C-terminus connected to GoxA's N-terminus via the flexible linker GS1, demonstrated a significantly higher Kcat/Km value (96% higher) than GoxA. Unfortunately, the expression of VHb-GS1-GoxA in A. niger was limited, resulting in a low gluconic acid production of 3.0 g/L. To overcome the low expression problem, single- and dual-strain systems were designed with tools of SpyCatcher/SpyTag and SnoopCatcher/SnoopTag. In these systems, Gox and VHb were separately expressed and then self-assembled into complex proteins. Impressively, the single-strain system outperformed the GoxA overexpression strain S1971, resulting in 23% and 9% higher gluconic acid production under 0.6 vvm and 1.2 vvm aeration conditions in the bioreactor fermentation, respectively. The successful construction of Gox and VHb fusion or complex proteins, as proposed in this study, presents promising approaches to enhance Gox catalytic efficiency and lower aerodynamic costs in gluconic acid production. KEY POINTS: • Overexpressing free VHb in A. niger did not improve the catalytic efficiency of Gox • The VHb-GS1-GoxA showed an increased Kcat/Km value by 96% than GoxA • The single-strain system worked better in the gluconic acid bioreactor fermentation.

Development of a two-enzyme system in Aspergillus niger for efficient production of N-acetyl-ß-D-glucosamine from powdery chitin.

A chitinase (PbChi70) from Paenibacillus barengoltzii was engineered by directed evolution to enhance its hydrolysis efficiency towards powder chitin. Through two rounds of screening, a mutant (mPbChi70) with a maximum specific activity of 73.21 U/mg was obtained, which is by far the highest value ever reported. The mutant gene was further transformed into Aspergillus niger FBL-B (ΔglaA) which could secrete high level of endogenously ß-N-acetylglucosaminidase (GlcNAcase), thus a two-enzyme expression system was constructed. The highest chitinase activity of 61.33 U/mL with GlcNAcase activity of 353.1 U/mL was obtained in a 5-L fermentor by high-cell density fermentation. The chitin-degrading enzyme cocktail was used for the bioconversion of GlcNAc from powder chitin directly, and the highest conversion ratio reached high up to 71.9 % (w/w) with GlcNAc purity ≥95 % (w/w). This study may provide an excellent chitinase as well as a double enzyme cocktail system for efficient biological conversion of chitin materials.

[Expression of ß-xylosidase An-xyl from Aspergillus niger and characterization of its xylose tolerance].

The hydrolysis of xylo-oligosaccharides catalyzed by ß-xylosidase plays an important role in the degradation of lignocellulose. However, the enzyme is easily inhibited by its catalytic product xylose, which severely limits its application. Based on molecular docking, this paper studied the xylose affinity of Aspergillus niger ß-xylosidase An-xyl, which was significantly differentially expressed in the fermentation medium of tea stalks, through cloning, expression and characterization. The synergistic degradation effect of this enzyme and cellulase on lignocellulose in tea stems was investigated. Molecular docking showed that the affinity of An-xyl to xylose was lower than that of Aspergillus oryzae ß-xylosidase with poor xylose tolerance. The Ki value of xylose inhibition constant of recombinant-expressed An-xyl was 433.2 mmol/L, higher than that of most ß-xylosidases of the GH3 family. The Km and Vmax towards pNPX were 3.6 mmol/L and 10 000 µmol/(min·mL), respectively. The optimum temperature of An-xyl was 65 ℃, the optimum pH was 4.0, 61% of the An-xyl activity could be retained upon treatment at 65 ℃ for 300 min, and 80% of the An-xyl activity could be retained upon treatment at pH 2.0-8.0 for 24 h. The hydrolysis of tea stem by An-xyl and cellulase produced 19.3% and 38.6% higher reducing sugar content at 2 h and 4 h, respectively, than that of using cellulase alone. This study showed that the An-xyl mined from differential expression exhibited high xylose tolerance and higher catalytic activity and stability, and could hydrolyze tea stem lignocellulose synergistically, which enriched the resource of ß-xylosidase with high xylose tolerance, thus may facilitate the advanced experimental research and its application.

Novel genetic tools improve Penicillium expansum patulin synthase production in Aspergillus niger.

Since the first CRISPR (clustered regularly interspaced short palindromic repeats)-Cas (CRISPR-associated) system was developed for creating double-stranded DNA breaks, it has been adapted and improved for different biotechnological applications. In this issue of The FEBS Journal, Arentshorst et al. developed a novel approach to enhance transgene expression of a specific protein, patulin synthase (PatE) from Penicillium expansum, in the important industrial filamentous fungus Aspergillus niger. Their technique involved the disruption of selected genes with counter-effects on targeted protein production and simultaneous integration of glucoamylase landing sites into the disrupted gene locus such as protease regulator (prtT) in an ATP-dependent DNA helicase II subunit 1 (kusA or ku70)-deletion strain. Multiple copies of the PatE transgene expression cassette were introduced by CRISPR-Cas9-mediated insertion. The purified PatE was further used for structural and functional studies, and the technique laid the foundation for elevating the overall production of various proteins or chemicals in those industrially important fungi.

CRISPR/Cas9 System-Mediated Multi-copy Expression of an Alkaline Serine Protease in Aspergillus niger for the Production of XOD-Inhibitory Peptides.

CRISPR/Cas9 system-mediated multi-copy expression of an alkaline serine protease (AoproS8) from Aspergillus oryzae was successfully built in Aspergillus niger. Furthermore, AoproS8 was continuously knocked in the glaA, amyA, and aamy gene loci in A. niger to construct multi-copy expression strains. The yield of the AoproS8 3.0 strain was 2.1 times higher than that of the AoproS8 1.0 strain. Then, a high protease activity of 11,023.2 U/mL with a protein concentration of 10.8 mg/mL was obtained through fed-batch fermentation in a 5 L fermenter. This is the first report on the high-level expression of alkaline serine proteases in A. niger. AoproS8 showed optimal activity at pH 9.0 and 40 °C. It was used for the production of xanthine oxidase (XOD)-inhibitory peptides from eight food processing protein by-products. Among them, the duck hemoglobin hydrolysates showed the highest XOD-inhibitory activity with an IC50 value of 2.39 mg/mL. Thus, our work provides a useful way for efficient expression of proteases in A. niger and high-value utilization of protein by-products.

Establishing a one-step marker-free CRISPR/Cas9 system for industrial Aspergillus niger using counter-selectable marker Ang-ace2.

OBJECTIVES: To develop a one-step, marker-free CRISPR/Cas9 system for highly efficient genome editing in industrial Aspergillus niger, with a short genetic operation cycle. RESULTS: Firstly, evaluation of different promoters for sgRNA expression revealed tRNAGly15 as the most efficient, achieving a remarkable 100% gene editing efficiency. Furthermore, a counter-selectable marker, Ang-ace2, was identified for A. niger. Subsequently, a CRISPR/Cas9 plasmid was developed, utilizing a truncated AMA1 element and the Ang-ace2 conditional expression cassette driven by a Tet-on promoter. In the presence of doxycycline, the plasmid demonstrated a 33% loss efficiency in the progeny of A. niger spores after a single generation, resulting in a shortened genetic operation cycle of 16 days for CRISPR/Cas9. CONCLUSIONS: The one-step marker-free CRISPR/Cas9 system was successfully developed in industrial A. niger, allowing for efficient gene editing while simultaneously reducing the editing time.

Evidence of polyamines mediated 2-acetyl-1-pyrroline biosynthesis in aromatic rice rhizospheric fungal species Aspergillus niger.

Rhizosphere soil of aromatic rice inhabits different fungal species that produce many bioactive metabolites including 2-acetyl-1-pyrroline (2AP). The mechanism for the biosynthesis of 2AP in the fungal system is still elusive. Hence, the present study investigates the role of possible nitrogen (N) precursors such as some amino acids and polyamines as well as the enzymes involved in 2AP synthesis in the fungal species isolated from the rhizosphere of aromatic rice varieties. Three fungal isolates were found to synthesize 2AP (0.32-1.07 ppm) and maximum 2AP was synthesized by Aspergillus niger (1.07 ppm) isolated from rhizosphere of Dehradun Basmati (DB). To determine the N source for 2AP synthesis, various N sources such as proline, glutamate, ornithine putrescine, spermine, and spermidine were used in place of putrescine in the synthetic medium (Syn18). The results showed that maximum 2AP synthesis was found with putrescine (1.07 ppm) followed by spermidine (0.89 ppm) and spermine (0.84 ppm). Further, LC-QTOF-MS analysis revealed the mobilization of spermine and spermidine into the putrescine, indicating that putrescine is the key N source for 2AP synthesis. Moreover, higher enzyme activity of DAO, PAO, and ODC as well as higher content of methylglyoxal metabolite in the A. niger NFCCI 5060 as compared to A. niger NFCCI 4064 (control) suggests the prominent role of these enzymes in the synthesis of 2AP. In conclusion, this study showed evidence of the polyamines mediated 2AP biosynthesis in A. niger NFCCI 5060.

Core-Shell Droplet-Based Microfluidic Screening System for Filamentous Fungi.

Filamentous fungi are competitive hosts for the production of drugs, proteins, and chemicals. However, their utility is limited by screening methods and low throughput. In this work, a universal high-throughput system for optimizing protein production in filamentous fungi was described. Droplet microfluidics was used to encapsulate large mutant strain pools in biocompatible core-shell microdroplets designed to avoid mycelial punctures and thus sustain prolonged culture. The self-assembled split GFP was then used to characterize the secretory capacity of the strains and isolate strains with superior production titers according to the fluorescence signals. The platform was applied to optimize the α-amylase secretion of Aspergillus niger, resulting in the isolation of a strain with 2.02-fold higher secretion capacity. The system allows the analysis of >105 single cells per h and will facilitate ultrahigh-throughput screening experiments of filamentous fungi. This method could help identify improved hosts for the large-scale production of biotechnology-relevant proteins. This is a broadly applicable system that can be equally used in other hosts.

Non-homologous end-joining-deficient filamentous fungal strains mitigate the impact of off-target mutations during the application of CRISPR/Cas9.

CRISPR/Cas9 genome editing technology has been implemented in almost all living organisms. Its editing precision appears to be very high and therefore could represent a big change from conventional genetic engineering approaches. However, guide RNA binding to nucleotides similar to the target site could result in undesired off-target mutations. Despite this, evaluating whether mutations occur is rarely performed in genome editing studies. In this study, we generated CRISPR/Cas9-derived filamentous fungal strains and analyzed them for the occurrence of mutations, and to which extent genome stability affects their occurrence. As a test case, we deleted the (hemi-)cellulolytic regulator-encoding gene xlnR in two Aspergillus niger strains: a wild type (WT) and a non-homologous end-joining (NHEJ)-deficient strain ΔkusA. Initial phenotypic analysis suggested a much higher prevalence of mutations in the WT compared to NHEJ-deficient strains, which was confirmed and quantified by whole-genome sequencing analysis. Our results clearly demonstrate that CRISPR/Cas9 applied to an NHEJ-deficient strain is an efficient strategy to avoid unwanted mutations. IMPORTANCE Filamentous fungi are commonly used biofactories for the production of industrially relevant proteins and metabolites. Often, fungal biofactories undergo genetic development (genetic engineering, genome editing, etc.) aimed at improving production yields. In this context, CRISPR/Cas9 has gained much attention as a genome editing strategy due to its simplicity, versatility, and precision. However, despite the high level of accuracy reported for CRISPR/Cas9, in some cases unintentional cleavages in non-targeted loci-known as off-target mutations-could arise. While biosafety should be a central feature of emerging biotechnologies to minimize unintended consequences, few studies quantitatively evaluate the risk of off-target mutations. This study demonstrates that the use of non-homologous end-joining-deficient fungal strains drastically reduces the number of unintended genomic mutations, ensuring that CRISPR/Cas9 can be safely applied for strain development.

Functional analysis of the protocatechuate branch of the ß-ketoadipate pathway in Aspergillus niger.

Bacteria and fungi catabolize plant-derived aromatic compounds by funneling into one of seven dihydroxylated aromatic intermediates, which then undergo ring fission and conversion to TCA cycle intermediates. Two of these intermediates, protocatechuic acid and catechol, converge on ß-ketoadipate which is further cleaved to succinyl-CoA and acetyl-CoA. These ß-ketoadipate pathways have been well characterized in bacteria. The corresponding knowledge of these pathways in fungi is incomplete. Characterization of these pathways in fungi would expand our knowledge and improve the valorization of lignin-derived compounds. Here, we used homology to characterize bacterial or fungal genes to predict the genes involved in the ß-ketoadipate pathway for protocatechuate utilization in the filamentous fungus Aspergillus niger. We further used the following approaches to refine the assignment of the pathway genes: whole transcriptome sequencing to reveal genes upregulated in the presence of protocatechuic acid; deletion of candidate genes to observe their ability to grow on protocatechuic acid; determination by mass spectrometry of metabolites accumulated by deletion mutants; and enzyme assays of the recombinant proteins encoded by candidate genes. Based on the aggregate experimental evidence, we assigned the genes for the five pathway enzymes as follows: NRRL3_01405 (prcA) encodes protocatechuate 3,4-dioxygenase; NRRL3_02586 (cmcA) encodes 3-carboxy-cis,cis-muconate cyclase; NRRL3_01409 (chdA) encodes 3-carboxymuconolactone hydrolase/decarboxylase; NRRL3_01886 (kstA) encodes ß-ketoadipate:succinyl-CoA transferase; and NRRL3_01526 (kctA) encodes ß-ketoadipyl-CoA thiolase. Strain carrying ΔNRRL3_00837 could not grow on protocatechuic acid, suggesting that it is essential for protocatechuate catabolism. Its function is unknown as recombinant NRRL3_00837 did not affect the in vitro conversion of protocatechuic acid to ß-ketoadipate.

Statistical Optimization of Biosurfactant Production from Aspergillus niger SA1 Fermentation Process and Mathematical Modeling.

In this study, we sought to investigate the production and optimization of biosurfactants by soil fungi isolated from petroleum oil-contaminated soil in Saudi Arabia. Forty-four fungal isolates were isolated from ten petroleum oil-contaminated soil samples. All isolates were identified using the internal transcribed spacer (ITS) region, and biosurfactant screening showed that thirty-nine of the isolates were positive. Aspergillus niger SA1 was the highest biosurfactant producer, demonstrating surface tension, drop collapsing, oil displacement, and an emulsification index (E24) of 35.8 mN/m, 0.55 cm, 6.7 cm, and 70%, respectively. This isolate was therefore selected for biosurfactant optimization using the Fit Group model. The biosurfactant yield was increased 1.22 times higher than in the nonoptimized medium (8.02 g/l) under conditions of pH 6, temperature 35°C, waste frying oil (5.5 g), agitation rate of 200 rpm, and an incubation period of 7 days. Model significance and fitness analysis had an RMSE score of 0.852 and a p-value of 0.0016. The biosurfactant activities were surface tension (35.8 mN/m), drop collapsing (0.7 cm), oil displacement (4.5 cm), and E24 (65.0%). The time course of biosurfactant production was a growth-associated phase. The main outputs of the mathematical model for biomass yield were Yx/s (1.18), and µmax (0.0306) for biosurfactant yield was Yp/s (1.87) and Yp/x (2.51); for waste frying oil consumption the So was 55 g/l, and Ke was 2.56. To verify the model's accuracy, percentage errors between biomass and biosurfactant yields were determined by experimental work and calculated using model equations. The average error of biomass yield was 2.68%, and the average error percentage of biosurfactant yield was 3.39%.

The α-(1,3)-glucan synthase gene agsE impacts the secretome of Aspergillus niger.

Aspergillus niger is widely used as a cell factory for the industrial production of enzymes. Previously, it was shown that deletion of α-1-3 glucan synthase genes results in smaller micro-colonies in liquid cultures of Aspergillus nidulans. Also, it has been shown that small wild-type Aspergillus niger micro-colonies secrete more protein than large mirco-colonies. We here assessed whether deletion of the agsC or agsE α-1-3 glucan synthase genes results in smaller A. niger micro-colonies and whether this is accompanied by a change in protein secretion. Biomass formation was not affected in the deletion strains but pH of the culture medium had changed from 5.2 in the case of the wild-type to 4.6 and 6.4 for ΔagsC and ΔagsE, respectively. The diameter of the ΔagsC micro-colonies was not affected in liquid cultures. In contrast, diameter of the ΔagsE micro-colonies was reduced from 3304 ± 338 µm to 1229 ± 113 µm. Moreover, the ΔagsE secretome was affected with 54 and 36 unique proteins with a predicted signal peptide in the culture medium of MA234.1 and the ΔagsE, respectively. Results show that these strains have complementary cellulase activity and thus may have complementary activity on plant biomass degradation. Together, α-1-3 glucan synthesis (in)directly impacts protein secretion in A. niger.

A CRISPR/Cas9-based multicopy integration system for protein production in Aspergillus niger.

The filamentous fungus Aspergillus niger is well known for its high protein secretion capacity and a preferred host for homologous and heterologous protein production. To improve the protein production capacity of A. niger even further, a set of dedicated protein production strains was made containing up to 10 glucoamylase landing sites (GLSs) at predetermined sites in the genome. These GLSs replace genes encoding enzymes abundantly present or encoding unwanted functions. Each GLS contains the promotor and terminator region of the glucoamylase gene (glaA), one of the highest expressed genes in A. niger. Integrating multiple gene copies, often realized by random integration, is known to boost protein production yields. In our approach the GLSs allow for rapid targeted gene replacement using CRISPR/Cas9-mediated genome editing. By introducing the same or different unique DNA sequences (dubbed KORE sequences) in each GLS and designing Cas9-compatible single guide RNAs, one is able to select at which GLS integration of a target gene occurs. In this way a set of identical strains with different copy numbers of the gene of interest can be easily and rapidly made to compare protein production levels. As an illustration of its potential, we successfully used the expression platform to generate multicopy A. niger strains producing the Penicillium expansum PatE::6xHis protein catalysing the final step in patulin biosynthesis. The A. niger strain expressing 10 copies of the patE::6xHis expression cassette produced about 70 µg·mL-1 PatE protein in the culture medium with a purity just under 90%.

The phenomenon of strain degeneration in biotechnologically relevant fungi.

Fungi are widely exploited for large-scale production in the biotechnological industry to produce a diverse range of substances due to their versatility and relative ease of growing on various substrates. The occurrence of a phenomenon-the so-called fungal strain degeneration-leads to the spontaneous loss or decline of production capacity and results in an economic loss on a tremendous scale. Some of the most commonly applied genera of fungi in the biotechnical industry, such as Aspergillus, Trichoderma, and Penicillium, are threatened by this phenomenon. Although fungal degeneration has been known for almost a century, the phenomenon and its underlying mechanisms still need to be understood. The proposed mechanisms causing fungi to degenerate can be of genetic or epigenetic origin. Other factors, such as culture conditions, stress, or aging, were also reported to have an influence. This mini-review addresses the topic of fungal degeneration by describing examples of productivity losses in biotechnical processes using Aspergillus niger, Aspergillus oryzae, Trichoderma reesei, and Penicillium chrysogenum. Further, potential reasons, circumvention, and prevention methods are discussed. This is the first mini-review which provides a comprehensive overview on this phenomenon in biotechnologically used fungi, and it also includes a collection of strategies that can be useful to minimize economic losses which can arise from strain degeneration. KEY POINTS: • Spontaneous loss of productivity is evident in many fungi used in biotechnology. • The properties and mechanisms underlying this phenomenon are very versatile. • Only studying these underlying mechanisms enables the design of a tailored solution.